Planning and Zoning Commission

Next date: Wednesday, March 11, 2026 | 05:30 PM to 07:30 PM

Planning and Zoning image_SMALL.jpg

The Planning and Zoning Commission is established to advise County Council regarding planning and zoning for the County pursuant to NMSA 1978, § 4-57-1  and for promoting the general welfare of the citizens of the County per Chapter 8, Article IX Los Alamos County Municipal code. Their role includes the coordinated, comprehensive, orderly, and harmonious physical development of the County in both short and long term.

Members of the public are encouraged to attend the meetings as noted below and provide public comment either in person or over Zoom

Meeting cancellations are posted on the County Calendar (Legistar).

 

When

  • Wednesday, January 14, 2026 | 05:30 PM - 07:30 PM
  • Wednesday, January 28, 2026 | 05:30 PM - 07:30 PM
  • Wednesday, February 11, 2026 | 05:30 PM - 07:30 PM
  • Wednesday, February 25, 2026 | 05:30 PM - 07:30 PM
  • Wednesday, March 11, 2026 | 05:30 PM - 07:30 PM
  • Wednesday, March 25, 2026 | 05:30 PM - 07:30 PM
  • Wednesday, April 08, 2026 | 05:30 PM - 07:30 PM
  • Wednesday, April 22, 2026 | 05:30 PM - 07:30 PM
  • Wednesday, May 13, 2026 | 05:30 PM
  • Wednesday, May 27, 2026 | 05:30 PM
  • Wednesday, June 10, 2026 | 05:30 PM
  • Wednesday, June 24, 2026 | 05:30 PM
  • Wednesday, July 08, 2026 | 05:30 PM
  • Wednesday, July 22, 2026 | 05:30 PM
  • Wednesday, August 12, 2026 | 05:30 PM - 07:30 PM
  • Wednesday, August 26, 2026 | 05:30 PM - 07:30 PM
  • Wednesday, September 09, 2026 | 05:30 PM - 07:30 PM
  • Wednesday, September 23, 2026 | 05:30 PM - 07:30 PM
  • Wednesday, October 14, 2026 | 05:30 PM
  • Wednesday, October 28, 2026 | 05:30 PM
  • Wednesday, November 18, 2026 | 05:30 PM - 07:30 PM
  • Wednesday, December 09, 2026 | 05:30 PM
  • Wednesday, January 13, 2027 | 05:30 PM - 07:30 PM
  • Wednesday, January 27, 2027 | 05:30 PM - 07:30 PM

Location

Council Chambers and Via Zoom

Municipal Building, 1000 Central Ave, 87544, View Map

Google Map
Tagged as: